|
Post by horselady on Oct 18, 2015 1:01:15 GMT
I am looking for a bit that looks like this one. oh and sorry for the rust on the truck that was in the back round, i believe it is called a correction bit. and has a copper mouth and mylar makes one but i know they are expensive so please look in your tack room for one that you are not using and let me know how much you want for it.
the mouth piece swivel near the copper and chrome piece
|
|
|
Post by horselover4life on Oct 18, 2015 2:14:34 GMT
|
|
|
Post by horselady on Oct 18, 2015 11:32:46 GMT
the second one is exactly like the one used on Cody yesterday and 30 is not bad. perhaps i will order it or wait for the equine affair and get it there. thanks. if anyone has one in their trunk they no longer need it . than i will gladly purchase it.
|
|
mingiz
Junior Member
Los Lunas, NM
Posts: 3,320
|
Post by mingiz on Oct 18, 2015 14:04:52 GMT
That is a med port? I will look out in the barn and see if I have one. If I do it's a western type.
|
|
|
Post by horselady on Oct 18, 2015 20:49:31 GMT
Thanks. he is strickly english with direct rein. we tried loose rein and he does not get it. the rider is working to teach him neck reining and he was trying yesterday. so if you have one i will of course purchase from you . and the port swivels from the side pieces. just to let you know it is not all one piece.
|
|
|
Post by lorddaxter on Oct 18, 2015 23:35:49 GMT
I ride Dax in this, love it, struggled to find a bit he liked and that was strong enough for him, this works great:)
|
|
|
Post by horselady on Oct 18, 2015 23:39:46 GMT
When i saw the port and how high it was i was not happy, the rider and her mom changed his bridle when i was busy doing stalls. and when i stopped for a couple of minutes to see him trotting i was so surprised to see him all collected and really thinking about his feet and where he was going without doing a head bob and planting his feet like he was 3 thousand pounds , thanks ld for the input.
|
|
mingiz
Junior Member
Los Lunas, NM
Posts: 3,320
|
Post by mingiz on Oct 19, 2015 14:51:05 GMT
I looked this morning. I don't have one like that. The one I have is a long shank and doesn't swivel.
|
|
|
Post by lorddaxter on Oct 20, 2015 12:45:33 GMT
Mine doesnt have such a high port, more like this....http://www.horsetackinternational.com/uxeter-kimberwick-bit.html#.ViY3R1Wz9Bc
But when we went to vic bennetts with janice etc all the bits in his tack room had high ports like the one you pictured and some even higher, I forget what he said about them and why sorry!
|
|